Bumpers Fenders Rock Sliders

Additional Information - RC4WD Tough Armor Machined Rear Bumper for Toyota TacomaSpecifications:Billet AluminumBlack Powder-coated FinishWidth: 2.52in / 64.1mmLength: 6.68in / 169.7mmHeight: 0.54in / 13.8mmWeight: 2.37oz / 67.4gShown installed on RC4WD...

Additional Information - Tough Armor Tube Roll Bar w/Rear Tire Mount for Chevy BlazerSpecifications:Heavy Duty Steel TubeHand WeldedBlack Powder-coated FinishLength: 7.10in / 180.4mmWidth: 6.85in / 174.0mmHeight: 3.93in / 99.8mmWeight: 10.42oz / 295...

Additional Information - DESCRIPTION Part No. SSD00283 Bronco Rock Shield Rear Bumper for TRX-4 FEATURES ...

Additional Information - DESCRIPTION Part No. SSD00277 Bronco Rock Shield Front Bumper for TRX-4 FEATURES ...

Additional Information - Width 215mm Depth 30mm (the the face that meets the mounting), Overall depth to the back of the corners 35mm. DESCRIPTION Part No. SSD00273 ...

Additional Information - DESCRIPTION Part No. SSD00264 1.9" Contender Wheels (Grey) FEATURES ...

Additional Information - DESCRIPTION Part No. SSD00259 Diamond Axle Link Mounts for Yeti / Wraith (Black) FEATURES ...

Additional Information - DESCRIPTION Part No. SSD00254 1.9" Steel 8 Spoke Beadlock Wheels (Black) FEATURES ...

Additional Information - DESCRIPTION Part No. SSD00248 1.9" Champion Wheels (Silver/Red) FEATURES ...

Additional Information - DESCRIPTION Part No. SSD00243 Rear Axle Portal Delete Kit for TRX-4 FEATURES ...

Additional Information - DESCRIPTION Part No. SSD00239 Rock Shield Winch Bumper for TRX-4 / SCX10 II FEATURES ...

Additional Information - Mounting width center is 44mm - also fits the SCX10. Width 190mm depth 8mm height 11mm. Posts are 22mm from the back or the bumper and the first hole centre is 9mm away at about 4mm intervals, last one 16.5mm. ...

Additional Information - Also fits RC4WD Trail Finder 2 LWB with 1987 Toyota XTRAcab Bodyset Z-RTR0057Additional information: Also fits RC4WD Trail Finder 2 LWB with 1987 Toyota XTRAcab Bodyset Z-RTR0057 Tough Armor Narrow Steel Sliders for Trail Finder...

Additional Information - Tough Armor Competition Stinger Bumper for 1/18 Gelande IISpecifications:Heavy Duty Stamped SteelHand WeldedBlack Powder-coated FinishBillet AluminumCNC MachinedBlack Anodized FinishLength: 1.89in / 48.0mmWidth: 1.17in / 29...

Additional Information - RC4WD N-Fab N-Durastep for 1/18 Gelande II D90 The N-Fab N-Durastep. These have been Officially Licensed by the N-Fab Products and are only available from RC4WD and our Dealers. Specifications: Heavy Duty Stamped Steel Hand...

Additional Information - Tough Armor Comp Series Flush Mount Bumper for TF2Specifications:Durable Black DelrinCNC MachinedManufactured by RC4WDLength: 6.41in / 163.0mmWidth: 1.01in / 25.5mmHeight: 0.37in / 9.51mmWeight: 1.62oz / 46gShown installed on...

Additional Information - RC4WD Type B Machine Front Winch Bumper for TF2Specifications:Heavy Duty Steel TubeHand WeldedBillet AluminumCNC MachinedBlack Powder-coated FinishCorrosion Resistant Length: 6.93in / 176.0mmHeight: 2.29in / 58.1mmWidth: 2.55in...

Additional Information - RC4WD Scale Rear Hitch CarrierSpecifications:Heavy Duty SteelHand WeldedPowder CoatedCorrosion ResistantTotal Length: 3.15in / 80.0mmTotal Width: 5.98in / 152.0mmTotal Height: 1.13in / 28.8mmBasket Internal Length: 1.56in / 39...

Additional Information - Tough Armor Machined Sliders for HPI Venture FJ CruiserSpecifications:CNC MachinedBillet AluminumSmooth Black Anodized FinishLength: 6.16in / 156.5mmWidth: 1.55in / 39.40mmTotal Weight: 3.21oz / 91.2gShown installed on HPI...

Additional Information - Tough Armor Side Steel Sliders for 1/18th Gelande IISpecifications:Heavy Duty Stamped SteelHand WeldedBlack Powder-coated FinishLength: 2.80in / 70.9mmWidth: 1.62in / 41.1mmTotal Weight: 1.75oz / 49.4gShown installed on RC4WD...

Additional Information - Tough Armor Steel Welded Side Sliders for Traxxas TRX-4Specifications:Heavy Duty Steel TubeHand WeldedBlack Powder-coated FinishCorrosion ResistantLength: 6.29in / 159.8mmWidth: 2.29in / 58.2mmWeight: 7.96oz / 225.6gShown...

Additional Information - Hitch Mount for RC4WD TF2Specifications: CNC Machined Billet Aluminum Black Anodized Finish Total Weight: 0.81oz / 23gShown installed on RC4WD Trail Finder 2 "LWB" RTR w/Mojave II Four Door Body Set (Z-RTR0030) with RC4WD...

Additional Information - Tough Armor Rear Steel Tube Bumper w/Hitch Mount for Trail Finder 2 Specifications:Heavy Duty Steel TubeHand WeldedPowder-coated FinishWidth: 1.79in / 45.36mmLength: 6.78in / 172.19mmHeight: 1.00in / 25.80mmWeight: 2.45oz / 69...

RC4WD Tough Armor Swing Away Tire Carrier w/Fuel Holder for Axial SCX10 IISpecifications:Heavy Duty Steel TubeHand WeldedBillet AluminumCNC MachinedBlack Powder-coated FinishCorrosion Resistant   Total Length: 8.04in / 204.2mmTotal Height: 4...

Additional Information - Front and Rear Bumper Mount for ECX BarrageSpecifications:Billet AluminumCNC MachinedSmooth Black Anodized FinishLength: 2.95in / 72.7mmWidth: 0.54in / 13.6mmWeight: 0.41oz / 11.6gManufactured by RC4WDShown installed on ECX...

Additional Information - Rear Swing Away Tire Carrier Bumper for Traxxas TRX-4Specifications:Heavy Duty Steel TubeHand WeldedBillet AluminumCNC MachinedBlack Powder-Coated FinishCorrosion Resistant Total Length: 7.82in / 198.55mmTotal Height: 4.03in /...

Additional Information - Tough Armor Competition Stinger Bumper for Trail Finder 2Specifications:Heavy Duty Steel TubeHand WeldedBillet AluminumCNC MachinedBlack Powder-coated FinishCorrosion Resistant Length: 3.24in / 82.3mmHeight: 5.26in / 133...

Additional Information - Mounting Adapter for TF2 SWB and Rampage Recovery Rear BumperAdapter allows mounting of the Rampage bumper to the rear of the TF2 SWB. Specifications:CNC MachinedBillet AluminumAnodied BlackMaximum Length: 0.69in / 17.4mmMinimum...

Additional Information - Tow Bar Mount for TF2 / G2Specifications:CNC Machined Billet AluminumLength: 3.97in / 101mmWidth: 0.64in / 16.3mmHeight: 0.87in / 22.2mm Mount to Mount Width: 3.22in / 82mmWeight: 0.81oz / 23gShown installed on RC4WD Trail Finder...

Additional Information - Tough Armor Front Winch Bumper for Axial SCX10 II (Type B) Specifications:Billet Aluminum Heavy Duty Steel TubeHand WeldedBlack Powder-coated FinishCorrosion ResistantWidth: 2.61in / 66.3mmLength:7.86in / 199.6mmHeight: 2.44in /...

Additional Information - Tough Armor Rear Bumper with Hitch Mount for Chevy Blazer / TF2Specifications:CNC MachinedBillet Aluminum Black Anodized Finish Width: 0.87in / 22.1mmLength:8.78in / 223.0mmHeight: 0.98in / 25.0mmWeight: 4.67oz / 132.5g...

Additional Information - These are 72mm on the inside of the chassis rails surface, so did slide in ok on the SCX10. Holes nearly line up, you may just need to widen those on the chassis a little. Note that this sticker out further than the stock mount...

Additional Information - Tough Armor Rear Tube Bumper w/Hitch Mount for Trail Finder 2Specifications: Heavy Duty Steel Tube Hand Welded Industrial-strength powder-coated finish Width: 1.88in / 47.98mm Length:7.22in / 183.40mmHeight: 1.05in / 26...

Additional Information - RC4WD Marlin Crawler Side Plastic Sliders for TF2 LWB These new RC4WD Marlin Crawler Plastic Side Sliders for the Trail Finder 2 LWB are designed to fit your truck perfectly! They have been Officially Licensed by Marlin Crawler...

Additional Information - Tough Armor Winch Bumper w/StingerThis Tough Armor Winch Bumper w/Stinger is versatile with its adjustable design for many bodies. Its exclusive design allows you to add your desired winch and also includes a winch stinger bar...

Additional Information - RC4WD N-Fab Front Bumper for Axial SCX10The N-Fab Front Bumper. These have been Officially Licensed by the N-Fab Products and are only available from RC4WD and our DealersSpecifications:Steel MaterialHand WeldedPowder...

Additional Information - Tough Armor front Bumper for G2 CruiserSpecifications:Heavy Duty Steel and Aluminum ConstructionHand Welded BumperPowder CoatedCorrosion ResistantBuilt-in Tow Shackle MountsLength: 2.32in / 59mmWidth: 6.65in / 169mmHeight: 2.24in...

Additional Information - RC4WD Rock Hard 4x4 Rocker Sliders Powder Coated Black w/Side TubingThese are the all new Licensed Rock Hard 4x4 Rocker Sliders. These has been Officially Licensed by the Rock Hard 4x4 company and are only available from RC4WD...

Additional Information - Tough Armor Wide Winch Bumper with Winch BarDesigned to fit the Axial SCX10 Chassis series. This wide front bumper offers a winch mount, protective bar and shackle mounts.Specifications:Heavy Duty Steel ConstructionCNC Machined...

Additional Information - Aluminum Rock Slider Set for Traxxas TRX4Specifications:Billet Aluminum CNC MachinedBlack Powder-Coated FinishLength: 6.31in / 160.37mmWidth: 2.05in / 52.06mmHeight: 1.07in / 27.18mmEach Weight: 2.47oz / 70.0gShown installed on...