Hardware Nuts & Bolts

Additional Information - Socket Head Cap Screws M1.6 x 8mm (10)What's Included:10x Socket Head Cap Screws M1.6 x 8mm (Silver)Notes:Uses RC4WD 1.5mm Metric Hex Driver ToolRC4WD 1.5mm Replacement Tip

Additional Information - RC4WD Miniature Scale Hex Bolts (M1.6 x 4mm) (Black)Specifications:High Grade SteelWeight: 0.03oz / 1gWhat's Included:20x Miniature Scale Hex Bolts (M1.6 x 4mm) (Black)Notes:Uses Miniature Scale Hex Bolt Tool (1.5mm Hex) (Z-S1328)

Additional Information - Screw head is 2.4mm Diameter.Flat Head Self Tapping Screws M1.4 X 8mm (Silver)Specifications:Material: SteelWhat's Included:10x Flat Head Self Tapping Screws M1.4 X 8mm (Silver)

Additional Information - Steel Button Head Cap Screws M1.6 x 12mm (10)What's Included:10x Steel Button Head Cap Screws M1.6 x 12mm (Black)Notes:Uses RC4WD 1.5mm Metric Hex Driver ToolRC4WD 1.5mm Replacement Tip

Additional Information - 10x M2 E-clip for R3 2 Speed Tranny What's Included: 10x M2 E-clip for R3 2 Speed Tranny Notes:Fits Gmade Sawback (Front/Rear)

Additional Information - Replacement Screws for Losi Micro Crawler Beadlock Wheels (M2 X 6mm)These screws are replacement for Micro Losi Beadlock Wheels. What's Included: 32x M2 x 6mm Silver Replacement Screws Notes: Fits Z-W0061 wheels...

Additional Information - Axial’s new machined cap head washers are designed for motor mount screws. Perfect for big power applications when maintaining gear mesh is critical. These washers will also prevent motor mount screws from digging into your...

Additional Information - Ever had a wheel nut come loose on the trail? Not fun, and it can leave you out of commission for the rest of the day. Axial’s M4 Serrated Wheel Nuts help eliminate this problem when you are deep in the woods. The one-way...

Additional Information - Axial Scorpion Shaft 3x22mm (2)You can replace AX30500 locked differential, with AX30170 shaft, AX30390 Gears and AXA1162 to gain an open diff in any Stock SCX10, AX10, Wraith, Bomber or Yeti axle setup.

Additional Information - Axial Hard Anodized Aluminum Servo Horn If you drive your Axial based rig hard, then you already know how tough the rocks can be on a servo horn. Upgrading to Axial's new HD aluminum servo horns will give you added piece of mind...

Additional Information - Genuine Axial factory hardware is built to last. Comes with a precision hex head for the best fit which helps prevent stripping.• M3x6mm Tapping Hex Socket Button Head - Black (10pcs)• Precision hex head for the best...

Additional Information - Genuine Axial factory hardware is built to last. Comes with a precision hex head for the best fit which helps prevent stripping.• M3x16mm Set Screw (Black) (10pcs) • Precision hex head for the best fit which helps...

Additional Information - The length is 7mm the balls are 5.8mm diameter.Flanged Ball 3x5.8x7mm (6pcs)Keeping you suspension running smoothly for longer is key whether you are running a Wraith, EXO, SCX10 or the AX10. There has now been no better or...

Additional Information - Axial Cap Head Screws AXA013 This is for a brand new pack of 10 screws M2 x 6mm These are used in all the SCX-10 trucks and used to secure the additional led light buckts. The cap head is 1.5mm allen.

Additional Information - Genuine Axial factory hardware is built to last. Comes with a precision hex head for the best fit which helps prevent stripping.• Screw Shaft M3x2.5x11m (10pcs)• Precision hex head for the best fit which helps prevent...

Additional Information - 2.5mm is the part that is not threaded. The threaded part is M4.Genuine Axial factory hardware is built to last. Comes with a precision hex head for the best fit which helps prevent stripping.Screw Shaft M4x2.5x12mm...

Additional Information - Genuine Axial factory hardware is built to last. Comes with a precision hex head for the best fit which helps prevent stripping.• M3x12mm Cap Head (Black) (10 pcs)• Precision hex head for the best fit which helps...

Additional Information - Genuine Axial factory hardware is built to last. Comes with a precision hex head for the best fit which helps prevent stripping.• M3x16mm Hex Socket Tapping Flat Head (Black) (10pcs)• Precision hex head for the best fit...

Genuine Axial factory hardware is built to last. Comes with a precision hex head for the best fit which helps prevent stripping.• M3x10mm Cap Head (Black) (10pcs)• Precision hex head for the best fit which helps prevent stripping• Made...

Additional Information - Genuine Axial factory hardware is built to last. Comes with a precision hex head for the best fit which helps prevent stripping.• M3x15mm Hex Socket Tapping Button Head (Black) (10pcs)• Precision hex head for the best...

Additional Information - Genuine Axial factory hardware is built to last. Comes with a precision hex head for the best fit which helps prevent stripping.• M2x10mm Cap Head (Black) (10pcs)• Precision hex head for the best fit which helps prevent...

Additional Information - Genuine Axial factory hardware is built to last. Comes with a precision hex head for the best fit which helps prevent stripping.• M3x3mm Set Screw (Black) (10pcs)• Precision hex head for the best fit which helps prevent...

Additional Information - Genuine Axial factory hardware is built to last. Comes with a precision hex head for the best fit which helps prevent stripping.• M3x2.5mm Set Screw (Black) (10pcs)• Precision hex head for the best fit which helps...

Additional Information - AXIAL E-CLIP E2.5 (10)Genuine Axial e-clips are manufactured to the exacting measurements. Steel construction for durability. Coated to resist corrosion. Available in a variety of sizes.

Additional Information - • Genuine Axial ball bearings are manufactured with high quality components for long life• Steel construction for durability• Provides less rolling resistance and more precision than bushings

Additional Information - Genuine Axial factory hardware is built to last. Comes with a precision hex head for the best fit which helps prevent stripping.• M3x30mm Cap Head - Black (10pcs)• Precision hex head for the best fit which helps prevent...

Additional Information - Genuine Axial factory hardware is built to last. Comes with a precision hex head for the best fit which helps prevent stripping.• M3x8mm Hex Socket Button Head (Black) (10pcs)• Precision hex head for the best fit which...

Additional Information - • 5 x 6.9 x 4.8mm transmission spacer• CNC machined aluminum• Grey anodize

Additional Information - • SCX10/AX10 motor plate• Aluminum construction • Black anodize• Laser etched logos

Additional Information - Axial WB8 Universal Joint Rebuild Kit

Additional Information - ID 5.66mm• Slipper clutch spring• Steel construction for durability• Black oxide coating to resist corrosion

Additional Information - • Metal driveshaft yoke set• Steel construction for durability• Black oxide coating to resist corrosion

Additional Information - • 3 x 4.5 x 5.5mm flange pipe• Steel construction for durability• Black oxide coating to resist corrosion

Additional Information - Genuine Axial replacement drivetrain and suspension parts are manufactured to exacting tolerances for superior performance.• 1.5 x 12mm pin• Stainless steel construction to resist corrosion

Additional Information - Genuine Axial replacement drivetrain and suspension parts are manufactured to exacting tolerances for superior performance.• 1.5 x 11mm pin• Stainless steel construction to resist corrosion

Additional Information - Genuine Axial replacement drivetrain and suspension parts are manufactured to exacting tolerances for superior performance.• 2 x 10mm pin• Stainless steel construction to resist corrosion

Additional Information - RC4WD Light Bar Knurled NutsSpecifications:CNC MachinedID: 0.07in / 1.7mmOD: 0.18in / 4.5mmWidth: 0.12in / 3mmWeight: Less than one gramShown installed with RC4WD 1/10 High Performance SMD LED Light Bar (75mm/3") (Z-E0058) for...

Additional Information - M4 E-clip (10)Specifications:OD: 0.35in / 9mmThickness: 0.02in / 0.6mmCombined Weight: 0.1oz / 3gWhat's Included:10x M4 E-clip (Black)

Additional Information - Replacement Shock Shafts for King Shocks (110mm)What's Included:2x Replacement Shock Shafts for King Shocks (110mm)Optional Parts:RC4WD King Off-Road Scale Piggyback Shocks w/Faux Reservoir (110mm) (Z-D0030)

Additional Information - Adjustable Heavy Duty Metal Servo Arm for Futaba Type ServoCustom made for Futaba type of servo. Such as Z-E0035 servo.Specifications:Heavy Duty Aluminum MaterialCompact light weight designWhat's Included:1x RC4WD Adjustable...