Gears, Pinions & Spurs

Additional Information - These do NOT fit the stock Axial axkes.Heavy Duty Bevel Gear Set 38T/13TSpecifications:CNC MachinedHardened SteelGear Ratio: 38/13 = 2.9:1 Weight: 1.12oz / 32gWhat's Included:1x Heavy Duty Bevel Gear Set 38T/13TRequired...

Additional Information - Internal Gear Set for AX2 2 Speed TransmissionSpecifications:CNC MachinedHardened SteelWhat's Included:1x Internal Gear Set for AX2 2 Speed TransmissionRequired Parts:AX2 2 Speed Transmission for Axial Wraith & SCX10/Honcho...

Additional Information - Replacement Gear Set for Hammer T-CaseSpecifications:CNC MachinedHardened Steel Gears.8 ModGear Ratio: 1.47 / 1Weight: 1.31oz / 37gShown Installed with Hammer Transfer Case (1.47/1) (Z-U0024) for example (Not Included)What's...

Triton T-case 1 Piece Shafts and Gears Specifications:CNC MachinedHardened Steel Gears.8 ModGear Ratio: 1:1Weight: 1.3oz / 36gShown installed on Triton Transfer Case (1:1) (Z-U0029) for example (Not Included)What's Included:1x Triton T-case 1...

Additional Information - Differential gear set• Powder metal constructionYou can replace AX30500 locked differential, with AX30170 shaft, AX30390 Gears and AXA1162 to gain an open diff in any Stock SCX10, AX10, Wraith, Bomber or Yeti axle setup.

Additional Information - M2 X 5MM Set Screw (10)Specifications:Material: SteelWeight: 0.03oz / 0.7gWhat's Included:10x M2 X 5mm Set ScrewNotes:Uses 0.9mm Metric Hex Driver Tool

Additional Information - M2.5 X 2 Set Screw (10)What's Included:10x Set Screw M2.5 X 2mm (Black)Notes:Uses RC4WD .050" Standard Hex Driver Tool (Z-F0022)

Additional Information - Internal Gear Set for R3 Single Speed TransmissionSpecifications:CNC MachinedHeat TreatedHardened 45# SteelCoated BlackGear Ratio: 1.78:1Wide Steel .32 Pinion GearDelrin Spur GearWeight: 2.65oz / 75gShown installed with R3 Scale...

Additional Information - 52T 32P Delrin Spur GearSpecifications:Heavy Duty Delrin MaterialEngineered & Manufactured by RC4WDDirect replacement for AX2 & R3 UnitsBore Size: 9.6mmTotal Length: 5.6mmInner hole size: 0.37in / 9.6mmScrew hole size: 0...

Additional Information - 18t 32p Hardened Steel Pinion GearSpecifications: Heat Treated Hardened Steel Engineered & Manufactured by RC4WDBore Size: 3.1mmTotal Length: 10mmOD: 0.63in / 16mm Gear Width: 0.19in / 5mm Weight: 0.3oz / 9g Shown with 540...

 Axial Bevel Gear Sets Standard OVER or UNDER drives. These are uprated Bevel gears for all Axial vehicles - SCX10, AX10, Scorpion, Honcho, Dingo, CF100 and the Wraith & Ridgecrest. Remember - Adding teeth to the Pinion or Subtracting teeth...

 Axial Bevel Gear Sets Standard OVER or UNDER drives. These are uprated Bevel gears for all Axial vehicles - SCX10, AX10, Scorpion, Honcho, Dingo, CF100 and the Wraith & Ridgecrest. Remember - Adding teeth to the Pinion or Subtracting teeth...

Additional Information - Axial Pinion Gears 13T These are uprated steel gears for all Axial vehicles - SCX10, AX10, Scorpion, Honcho, Dingo, CF100, XR10 and the Wraith. Remember - Adding teeth to the Pinion or Subtracting teeth from the spur gear will...

Additional Information - Axial Pinion Gear 14T These are uprated steel gears for all Axial vehicles - SCX10, AX10, Scorpion, Honcho, Dingo, CF100, XR10 and the Wraith. Remember - Adding teeth to the Pinion or Subtracting teeth from the spur gear will...

Axial Transmission Spur Gear Cover AX80078 There is no better way to extend the life of you spur gear. Fitting is so simple and while you have the transmission appart you may want to replace that worn Spur gear. Don't forget to grease all parts for a...

 Axial Bevel Gear Sets Standard. These are standard Bevel gears for all Axial vehicles - SCX10, AX10, Scorpion, Honcho, Dingo, CF100, Jeep and the Wraith. You may also want to consider upgrading to the uprated version. Remember - Adding teeth...

Additional Information - Axial Pinion Gear 15T These are uprated steel gears for all Axial vehicles - SCX10, AX10, Scorpion, Honcho, Dingo, CF100, XR10 and the Wraith. Remember - Adding teeth to the Pinion or Subtracting teeth from the spur gear will...

Spur Gear AX30672 48DP 87T for SCX10 Honcho Dingo CF100 Jeep There is no better way to improve a noisy drive train than a fresh spur gear. This is very easy to change over on your truck with just one bold and three screws. You may also want to look at...

Additional Information - Bearings for small gear are AX1221. They are 9mm thick and small gear 16mm and larger one 28.5mm approximately.img{max-width:100%}Gear set for Axial Transmissions This is Both the diff and idler gear for the Axail Racing...

Additional Information - Helical Gear Set for 1/10 Yota AxleDesigned to run smoother and be stronger. This helical gear set from RC4WD for the Yota axle line will be up to the job. Specifications:CNC MachinedHardened SteelGear Ratio: 12 / 32 = 2.67 : 1...

Additional Information - 1x Heavy Duty Spool Gear for T-Rex 60 Axle New heavy duty steel spool, much stronger than previous version! What's Included: 1x HD Spool Gear for T-Rex 60 Notes:Designed to fit RC4WD T-Rex 60 plastic or alum axle...

Additional Information - (1) The Ultimate Scale Yota 1/10 Axle Ring & Pinion Gears This is a stock replacement ring and pinion gears for Yota Axle (Part # Z-A0058, Z-A0061, Z-A0036) What's Included: 1x RC4WD Yota Axle Steel Ring & Pinion...

Additional Information - 64t Delrin Spur Gear for R3 2 Speed TransmissionSpecifications:Heavy duty delrin materialEngineered & Manufactured by RC4WDDirect replacement for R3 2 SpeedBore Size: 9.6mmTotal Length: 5.6mmOD: 2.06in / 52.35mmWidth: 0.21in...

Additional Information - Will also Fit to AX2 2 Speed Transmission Z-U0006 designed for the SCX10 and Wraith trucks.

Additional Information - 14t 32p Hardened Steel Pinion Gear Specifications: Bore Size: 3.1mmTotal Length: 10mmHeat Treated Hardened Steel Shown mounted on R3 Scale 2 Speed Transmission (Z-U0025) (Not Included) What's Included: 1x 14t 32p...