null

Suspension, Shocks, Springs etc

Suspension, Shocks, Springs etc

How To: Shock absorber basics and oil change

You know it’s time to change the oils in your shocks when you notice there isn’t enough oil or when you’re making changes to the damping setup or when the shocks are damaged and require taking apart. In any case, the shock oils should be changed 2–3 times during a season. The properties of the oils might fade or change over time. One problem is dirt and dust that gets into the shocks especially when driving in dusty conditions. When there’s dirt in the oils, the seals and other parts of the shocks will wear down faster compared to driving with clean oils.

When you’re changing the oils, start by removing the shock and cleaning it carefully. By cleaning the shock, you can make sure no sand grains or other particles will remain the shock that can damage it from the inside.

Do the following:

  • Remove the shocks.
  • Remove the spring from the shock to make handling easier.
  • When cleaning the shock, also clean under the rubber boot on the shock shaft, if there is one.

Now, empty the shocks. You can use a single-use cup and place a paper towel in the bottom that will absorb the oil in itself. Remove the cap from the shock and place it on a paper towel. Now, pour the oil from the shock in the cup. Move the shock shaft up and down a couple of times to remove oil from under the piston. When most of the oil is removed, place the shock upside down on a paper towel so the remaining oil will come out. Do the same with the other shocks.


  • If the oil that’s come out of the shock is dirty (dark and thick like jelly), remove and clean the seals at the bottom of the shock and rebuild the shock. By cleaning the seals, you can make sure the dirty oil containing sand and metal particles won’t wear down the shocks.
  • If the oil that comes out of the shock is still “normal”, i.e. runny and transparent, it’ll be enough to clean the cylinder with a rolled-up piece of paper towel. Clean the cap as well and if you’re using caps with bladders, check the condition of the bladder and that it fits properly.

Now, you can add the oil. I’d recommend using a work stand to keep the shocks upright during the assembly.

  • Pull the whole shock shaft out of the shock body before adding the oil.
  • Fill the shock about halfway.
  • Now, move the piston in the oil so that all the air gets out. Wait for a moment and move the piston again.
  • Next, add more oil until it’s 1-2 mm from the top of the cylinder.
  • Move the piston up and down and let them sit on the desk until all the air bubbles in the oil has disappeared.

The right way to proceed depends on the type of the shock. With all shock types, it’s essential that the shock is in an upright position so that the air bubbles can move right upwards.

There are several different cap types:

Emulsion shocks:
Air is allowed to mix with the oil. With this type of shocks, it’s particularly important to make sure there is no air in the shock when the shaft is pushed all the way up.

There are several types of caps for emulsion shocks
With the Bleeder type, the air is removed using the bleeding screw on the cap.
With the other cap types, the excess oil and air will come out through the threading on the cap.

Bleeder Cap on the left and without on the right

 


With both cap types, fill the shock cylinder up to the brim to make sure the space inside the cap will also fill up and any extra oil can come out.

  • Fill the cylinder
  • Prepare the caps: Remove the screw from the bleeder cap. Place seals

With bleeder screw. Screw in the cap. Screw in tightly using moderate force. Now, push in the shock shaft and the air and excess oil should come out of the bleeding screw hole. When you see that all excessive oil came out, you’ll know there’s only oil left in the shock. Screw the bleeding screw back in. Compress the shaft a few times. If there’s clear signs of air still in the shock, add more oil and try removing the air again.

If there’s no bleeding screw, fill the shock all the way up with oil. Before screwing on the cap, you can add a few drops of oil in the cap. Now screw in the cap loosely and carefully move the shaft all the way in. All excess oil and air should come out through the threading on the cap. Hold the shaft in and tighten the cap to get rid of the remaining excess oil. Now, compress the shock a couple of times and see if there is still air in the shaft.

There should be no rebound on an emulsion shock, i.e., when the piston is pushed all the way in it shouldn’t move outwards by itself once it’s released. It’s essential to have similar reaction in both shocks at one end (front/rear) of the car, so their functioning would be identical on both the left and right side.

Bladder shocks
If you’re using bladder caps, building the shock is similar to that in emulsion shocks without bleeder caps. Fill the cap with oil up to 1–2 mm from the brim, not all the way up because the bladder takes some space in the cap. With bladder caps you can adjust the rebound to make damping more progressive – the longer the shock travels, the stiffer it gets. A bladder will also keep the oil from foaming which makes the car move more smoothly during a longer drive.


When it comes to building, the only difference to emulsion shocks is that the rebound can be adjusted by how much of the piston shaft you push in before screwing the cap on.

  • The farther you push the shaft in, the less you’ll have rebound.
  • So, if you push the shaft all the way in, there’s no rebound and the shock works like an emulsion shock.

Adjust the rebound the way you want and hold it against the desk while you screw the cap on so the shaft won’t move outwards. When both shocks are ready, pump the shocks a couple times. Do the same on both shocks and check that the shaft comes back out the same on both shocks. If the one of them comes out more, there’s too much oil in it. Or if it doesn’t come out enough, there’s too little oil in it.

Tip! You get a suitable amount of rebound for a basic setup when you leave about 1/3 of the shaft out. You can build the shock with the shaft pushed all the way up. Both will result in a smooth and neutral outcome.
Note! See, however, that the shock shaft doesn’t damage the bladder and the shaft doesn’t squeeze up the bladder.

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Element RC FT Enduro Links 93mm EL42184

    Element RC FT Enduro Links 93mm EL42184

    Element RC

    RRP £8.49
    Additional Information - ELEMENT RC FT ENDURO LINKS 93MMThe Enduro links are now sold separately by length.FEATURESLinks are available in straight and high clearance (HC) geometryMade from high strength steelAll FT links are nickel plated with a...
    EL42184
    RRP £8.49
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £8.49
    Subtotal:
  • Fastrax Racing Pure Silicone Oil 20wt FAST60-20 200cst 50ml easy pour bottle Fastrax Racing Pure Silicone Oil 20wt FAST60-20 200cst 50ml easy pour bottle

    Fastrax Racing Pure Silicone Oil 20wt FAST60-20 200cst 50ml easy pour bottle

    Fastrax

    RRP £3.99
    Additional Information - Perfect for those small scale crawlers and scale trucks like the FMS FCX24. This is a real must have in you tool box, an oil change can make all the difference to oil dirty shocks. FASTRAX RACING PURE SILICONE OIL 20WT FAST60-20...
    FAST60-20
    RRP £3.99
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £3.99
    Subtotal:
  • Fastrax Racing Pure Silicone Oil 50wt FAST60-50 600cst 50ml easy pour bottle Fastrax Racing Pure Silicone Oil 50wt FAST60-50 600cst 50ml easy pour bottle

    Fastrax Racing Pure Silicone Oil 50wt FAST60-50 600cst 50ml easy pour bottle

    Fastrax

    RRP £3.99
    Additional Information - This is a real must have in you tool box, an oil change can make all the difference to oil dirty shocks. FASTRAX RACING PURE SILICONE OIL 50WT FAST60-50 See below for other part numbers & wt. Remember Thinner oil / softer...
    FAST60-50
    RRP £3.99
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £3.99
    Subtotal:
  • Fastrax Racing Pure Silicone Oil 40wt FAST60-40 500cst 50ml easy pour bottle Fastrax Racing Pure Silicone Oil 40wt FAST60-40 500cst 50ml easy pour bottle

    Fastrax Racing Pure Silicone Oil 40wt FAST60-40 500cst 50ml easy pour bottle

    Fastrax

    RRP £3.99
    Additional Information - Great for Buggues and Truggies. This is a real must have in you tool box, an oil change can make all the difference to oil dirty shocks. FASTRAX RACING PURE SILICONE OIL 40WT FAST60-40 See below for other part numbers & wt...
    FAST60-40
    RRP £3.99
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £3.99
    Subtotal:
  • SSD Shock Rebuild Kit (2) SSD00311 Seal spacers X rings 2mm E clip SSD-RC

    SSD Shock Rebuild Kit (2) SSD00311 Seal spacers X rings 2mm E clip SSD-RC

    SSD

    RRP £10.50
    Additional Information - DESCRIPTION Part No. SSD00311 Shock Rebuild Kit FEATURES Seal, spacers X rings Enough parts to rebuild two...
    SSD00311
    RRP £10.50
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £10.50
    Subtotal:
  • 106mm (4.17") Internally Threaded Aluminum Link SILVER x4 Z-S1501 RC4WD links 106mm (4.17") Internally Threaded Aluminum Link SILVER x4 Z-S1501 RC4WD links

    106mm (4.17") Internally Threaded Aluminum Link SILVER x4 Z-S1501 RC4WD links

    RC4WD

    RRP £14.49
    Additional Information - 106mm (4.17") Internally Threaded Aluminum Link (Silver) (4)Specifications: Smooth Anodized Coating 3mm Female Threading Length: 4.17in / 106mm OD: 0.23in / 6mm Thread Depth: 0.59in / 15mm Weight: 0.32oz / 9gWhat's Included: 4x...
    Z-S1501
    RRP £14.49
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £14.49
    Subtotal:
  • Steering Links for Wide D44 Axles Z-S2027 RC4WD Axle link 170 74mm Set Steering Links for Wide D44 Axles Z-S2027 RC4WD Axle link 170 74mm Set

    Steering Links for Wide D44 Axles Z-S2027 RC4WD Axle link 170 74mm Set

    RC4WD

    MSRP: £13.49
    RRP £11.99
    Additional Information - Steering Links for Wide D44 AxlesSpecifications:CNC MachinedBillet AluminumSilver Anodized Finish�?�Total Weight: 1.57oz / 44.6gShown installed on RC4WD Carbon Assault 1/10th Monster Truck w/ Manticore Lexan Body Set (Z-RTR0041)...
    Z-S2027
    MSRP: £13.49
    RRP £11.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: £13.49
    RRP £11.99
    Subtotal:
  • Upper Links for Carbon Assault 1/10th Monster Truck Z-S2009 RC4WD Suspension Upper Links for Carbon Assault 1/10th Monster Truck Z-S2009 RC4WD Suspension

    Upper Links for Carbon Assault 1/10th Monster Truck Z-S2009 RC4WD Suspension

    RC4WD

    RRP £17.99
    Additional Information - Upper Links for Carbon Assault 1/10th Monster TruckSpecifications:CNC MachinedBillet AluminumSilver Anodized Finish�?�Total Weight: 2.53oz / 71.8gShown installed on RC4WD Carbon Assault 1/10th Monster Truck w/ Manticore Lexan...
    Z-S2009
    RRP £17.99
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £17.99
    Subtotal:
  • On Sale
    Shock Hoops SCX10 II AX31380 Axial Hoop Body Post Mount Chassis SCX102

    Shock Hoops SCX10 II AX31380 Axial Hoop Body Post Mount Chassis SCX102

    Axial

    MSRP: £10.99
    Now: £10.44
    Was: £14.99
    Additional Information - SCX10 shock hoops parts tree Molded plastic shock hoops Compatible with SCX10 and SCX10 II chassis Genuine Axial Parts
    AX31380
    MSRP: £10.99
    Now: £10.44
    Was: £14.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: £10.99
    Now: £10.44
    Was: £14.99
    Subtotal:
  • Element RC FT Enduro Shock Bushings, Steel EL42055 Balls Enduro (4) bush

    Element RC FT Enduro Shock Bushings, Steel EL42055 Balls Enduro (4) bush

    Element RC

    RRP £7.49
    Additional Information - Element RC FT Enduro Shock Bushings, Steel EL42055. Silver steel shoccl bushes / balls, sold in a packet of 4. These are an Factory Team upgrade part.
    EL42055
    RRP £7.49
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £7.49
    Subtotal:
  • Element RC Enduro Pivot Balls Steel EL42054 suspension ball Enduro Sendero (10)

    Element RC Enduro Pivot Balls Steel EL42054 suspension ball Enduro Sendero (10)

    Element RC

    MSRP: £18.49
    RRP £17.00
    Additional Information - Element RC Enduro Pivot Balls, Steel EL42054. Replacement picot suspension balls in silver supplied as a packet of 10.
    EL42054
    MSRP: £18.49
    RRP £17.00
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: £18.49
    RRP £17.00
    Subtotal:
  • Element RC Enduro Shock Mounts, HARD EL42013 Stiff less flex upgrade mount

    Element RC Enduro Shock Mounts, HARD EL42013 Stiff less flex upgrade mount

    Element RC

    RRP £12.49
    Additional Information - Element RC Enduro Shock Mounts, Hard EL42013. Upgrade to standard parts, they are stiffer giving less flex.
    EL42013
    RRP £12.49
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £12.49
    Subtotal:
  • Element RC Shock Springs, Blue, 2.09 lb/in, L63 mm EL42090 Enduro Spring

    Element RC Shock Springs, Blue, 2.09 lb/in, L63 mm EL42090 Enduro Spring

    Element RC

    MSRP: £8.49
    RRP £6.29
    Additional Information - Element RC Shock Springs, Blue, 2.09 Lb/In, L63 Mm EL42090 Packet contains just two springs, one pair.
    EL42090
    MSRP: £8.49
    RRP £6.29
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: £8.49
    RRP £6.29
    Subtotal:
  • Out of Stock - On Order with Supplier
    88mm 3.46" Internally Threaded Aluminum Link SILVER x4 Z-S1505 RC4WD M3 6mm Rod 88mm 3.46" Internally Threaded Aluminum Link SILVER x4 Z-S1505 RC4WD M3 6mm Rod

    88mm 3.46" Internally Threaded Aluminum Link SILVER x4 Z-S1505 RC4WD M3 6mm Rod

    RC4WD

    RRP £12.99
    88mm (3.46") Internally Threaded Aluminum Link (Silver) (4)Specifications:Smooth Anodized Coating3mm Female ThreadingLength: 3.46in / 88mmOD: 0.23in / 6mmThread Depth: 0.39in / 10mmWeight: 0.24oz / 7gWhat's Included:4x 88mm (3.46") Internally Threaded...
    Z-S1505
    RRP £12.99
    Qty in Cart: 0
    Price:
    RRP £12.99
    Subtotal:
  • 89mm (3.5") Internally Threaded Aluminum Link (Silver) (4) Z-S1499 RC4WD M3 6mm 89mm (3.5") Internally Threaded Aluminum Link (Silver) (4) Z-S1499 RC4WD M3 6mm

    89mm (3.5") Internally Threaded Aluminum Link (Silver) (4) Z-S1499 RC4WD M3 6mm

    RC4WD

    RRP £12.99
    89mm (3.5") Internally Threaded Aluminum Link (Silver) (4)Specifications: Smooth Anodized Coating3mm Female ThreadingLength: 3.5in / 89mmOD: 0.23in / 6mmThread Depth: 0.39in / 10mmWeight: 0.24oz / 7gWhat's Included: 4x 89mm (3.5") Internally Threaded...
    Z-S1499
    RRP £12.99
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £12.99
    Subtotal:
  • Out of Stock - On Order with Supplier
    79mm (3.11") Internally Threaded Aluminum Link (Black) (4) Z-S1427 RC4WD M3 6mm

    79mm (3.11") Internally Threaded Aluminum Link (Black) (4) Z-S1427 RC4WD M3 6mm

    RC4WD

    RRP £12.99
    Additional Information - 79mm (3.11") Internally Threaded Aluminum Link (Black) (4)Photo shows various sizes available (you only get the size listed)Specifications: Smooth Anodized Coating 3mm Female Threading 6mm Outside Diameter 79mm (3.11") End to...
    Z-S1427
    RRP £12.99
    Qty in Cart: 0
    Price:
    RRP £12.99
    Subtotal:
  • 15mm (0.59") Internally Threaded Aluminum Link (Black) (4) Z-S1455 RC4WD M3 6mm 15mm (0.59") Internally Threaded Aluminum Link (Black) (4) Z-S1455 RC4WD M3 6mm

    15mm (0.59") Internally Threaded Aluminum Link (Black) (4) Z-S1455 RC4WD M3 6mm

    RC4WD

    RRP £12.99
    30mm (1.18") Internally Threaded Aluminum Link (Black) (4)Specifications: Smooth Anodized Coating3mm Female Threading6mm Outside Diameter30mm (1.18") End to End Laser Etched Size Listed on Link What's...
    Z-S1455
    RRP £12.99
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £12.99
    Subtotal:
  • 20mm (0.79") Internally Threaded Aluminum Link (Red) (4) Z-S1417 RC4WD M3 6mm

    20mm (0.79") Internally Threaded Aluminum Link (Red) (4) Z-S1417 RC4WD M3 6mm

    RC4WD

    RRP £12.99
    Additional Information - 20mm (0.79") Internally Threaded Aluminum Link (Red) (4)Photo shows various sizes available (you only get the size listed)Specifications: Smooth Anodized Coating Laser Etched sizes on the Link 3mm Female Threading 6mm Outside...
    Z-S1417
    RRP £12.99
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £12.99
    Subtotal:
  • 50mm (1.97") Internally Threaded Aluminum Link (Black) (4) Z-S1413 RC4WD M3 6mm

    50mm (1.97") Internally Threaded Aluminum Link (Black) (4) Z-S1413 RC4WD M3 6mm

    RC4WD

    RRP £12.99
    50mm (1.97") Internally Threaded Aluminum Link (Black) (4)Photo shows various sizes available (you only get the size listed)Specifications: Smooth Anodized Coating Laser Etched sizes on the Link 3mm Female Threading 6mm Outside Diameter 50mm (1.97")...
    Z-S1413
    RRP £12.99
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £12.99
    Subtotal:
  • 50mm (1.97") Internally Threaded Aluminum Link (Red) (4) Z-S1411 RC4WD M3 6mm

    50mm (1.97") Internally Threaded Aluminum Link (Red) (4) Z-S1411 RC4WD M3 6mm

    RC4WD

    RRP £12.99
    Additional Information - 50mm (1.97") Internally Threaded Aluminum Link (Red) (4)Photo shows various sizes available (you only get the size listed)Specifications: Smooth Anodized Coating Laser Etched sizes on the Link 3mm Female Threading 6mm Outside...
    Z-S1411
    RRP £12.99
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £12.99
    Subtotal:
  • 15mm (.59") Aluminum Long Shiny SOLID Links (4) Z-S1404 RC4WD M3 10mm Thread 15mm (.59") Aluminum Long Shiny SOLID Links (4) Z-S1404 RC4WD M3 10mm Thread

    15mm (.59") Aluminum Long Shiny SOLID Links (4) Z-S1404 RC4WD M3 10mm Thread

    RC4WD

    RRP £12.99
    15mm (.59") Aluminum Long Shiny Solid Links (4)Fit T-Maxx Rod Ends or RC4WD Aluminum M3 Rod Ends Specifications:Super Shiny Polished FinishCNC Machined by RC4WDM3 Threaded HolesDiameter: 1/4 (Links)***Length: Please refer to the product title for the...
    Z-S1404
    RRP £12.99
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £12.99
    Subtotal:
  • 90mm (3.54") Internally Threaded Aluminum Link RED (4) Z-S1401 RC4WD M3 6mm

    90mm (3.54") Internally Threaded Aluminum Link RED (4) Z-S1401 RC4WD M3 6mm

    RC4WD

    RRP £12.99
    90mm (3.54") Internally Threaded Aluminum Link (Red) (4)Photo shows various sizes available (you only get the size listed)Specifications:Smooth Anodized Coating Laser Etched sizes on the Link 3mm Female Threading 6mm Outside Diameter 90mm (3.54") End...
    Z-S1401
    RRP £12.99
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £12.99
    Subtotal:
  • Aluminum 150mm (5.91") Long SOLID Links (4) Z-S1400 RC4WD M3 10mm Thread Aluminum 150mm (5.91") Long SOLID Links (4) Z-S1400 RC4WD M3 10mm Thread

    Aluminum 150mm (5.91") Long SOLID Links (4) Z-S1400 RC4WD M3 10mm Thread

    RC4WD

    MSRP: £14.49
    RRP £12.99
    Additional Information - Aluminum 150mm (5.91") Long Solid Links (4)Much Stronger than Aluminum Links!Fit T-Maxx Rod Ends.Specifications:Super Shiny Polished FinishCNC Machined by RC4WDResists Rust and CorrosionM3 Threaded Shaft (10mm Long)Diameter: 6mm...
    Z-S1400
    MSRP: £14.49
    RRP £12.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: £14.49
    RRP £12.99
    Subtotal:
  • 100mm (3.93") Internally Threaded Aluminum Link SILVER (4) Z-S1399 RC4WD M3 6mm

    100mm (3.93") Internally Threaded Aluminum Link SILVER (4) Z-S1399 RC4WD M3 6mm

    RC4WD

    RRP £12.99
    Additional Information - 100mm (3.93") Internally Threaded Aluminum Link (Silver) (4)Photo shows various sizes available (you only get the size listed)Specifications: Smooth Anodized Coating Laser Etched sizes on the link 3mm Female Threading 6mm...
    Z-S1399
    RRP £12.99
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £12.99
    Subtotal:
  • Aluminum 57mm (2.24") Long SOLID Links (4) Z-S1396 RC4WD M3 10mm Thread Aluminum 57mm (2.24") Long SOLID Links (4) Z-S1396 RC4WD M3 10mm Thread

    Aluminum 57mm (2.24") Long SOLID Links (4) Z-S1396 RC4WD M3 10mm Thread

    RC4WD

    RRP £3.49
    Aluminum 57mm (2.24") Long Solid Links (4) Much Stronger than Aluminum Links! Fit T-Maxx Rod Ends. Specifications:Super Shiny Polished Finish CNC Machined by RC4WDResists Rust and Corrosion M3 Threaded Shaft (10mm long) Diameter: 6mm -...
    Z-S1396
    RRP £3.49
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £3.49
    Subtotal:
  • 73mm (2.87") Long Shiny SOLID Links (4) Z-S1394 RC4WD M3 10mm Thread G2 Bottom 73mm (2.87") Long Shiny SOLID Links (4) Z-S1394 RC4WD M3 10mm Thread G2 Bottom

    73mm (2.87") Long Shiny SOLID Links (4) Z-S1394 RC4WD M3 10mm Thread G2 Bottom

    RC4WD

    RRP £12.99
    Additional Information - 73mm (2.87") Long Shiny Solid Links (4)Fit T-Maxx Rod Ends or RC4WD Aluminum M3 Rod Ends Specifications:Super Shiny Polished Finish CNC Machined by RC4WDM3 Threaded HolesDiameter: 6mm - .24 " (Links)***Length: Please refer...
    Z-S1394
    RRP £12.99
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £12.99
    Subtotal:
  • Aluminum 27mm (1.06") Long SOLID Links (4) Z-S1391 RC4WD M3 10mm Thread Aluminum 27mm (1.06") Long SOLID Links (4) Z-S1391 RC4WD M3 10mm Thread

    Aluminum 27mm (1.06") Long SOLID Links (4) Z-S1391 RC4WD M3 10mm Thread

    RC4WD

    RRP £12.99
    Aluminum 27mm (1.06") Long Solid Links (4) Much Stronger than Aluminum Links! Fit T-Maxx Rod Ends. Specifications: Super Shiny Polished Finish CNC Machined by RC4WD Resists Rust and Corrosion M3 Threaded Shaft (10mm Long) Diameter: 6mm - .24 "...
    Z-S1391
    RRP £12.99
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £12.99
    Subtotal:
  • RC4WD 73mm (2.87") Internally Threaded Titanium Link Z-S1329 G2 FRONT Bottom RC4WD 73mm (2.87") Internally Threaded Titanium Link Z-S1329 G2 FRONT Bottom

    RC4WD 73mm (2.87") Internally Threaded Titanium Link Z-S1329 G2 FRONT Bottom

    RC4WD

    RRP £5.99
    Additional Information - RC4WD 73mm (2.87") Internally Threaded Titanium LinkSpecifications:3mm Female ThreadingLaser Etched Size Listed on LinkLength: 2.87in / 73mmThread Length: 0.39in / 10mmOD: 0.21in / 6mm Weight: 0.32oz / 9gWhat's Included:1x RC4WD...
    Z-S1329
    RRP £5.99
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £5.99
    Subtotal:
  • RC4WD 59mm 2.32" Internally Threaded Titanium Link Z-S1323 Gelande II G2 3 link RC4WD 59mm 2.32" Internally Threaded Titanium Link Z-S1323 Gelande II G2 3 link

    RC4WD 59mm 2.32" Internally Threaded Titanium Link Z-S1323 Gelande II G2 3 link

    RC4WD

    MSRP: £7.49
    RRP £5.99
    RC4WD 59mm (2.32") Internally Threaded Titanium LinkSpecifications:3mm Female ThreadingLaser Etched Size Listed on LinkLength: 2.32in / 59mmThread Length: 0.39in / 10mmOD: 0.21in / 6mm Weight: 0.24oz / 7gWhat's Included:1x RC4WD 59mm (2.32") Internally...
    Z-S1323
    MSRP: £7.49
    RRP £5.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: £7.49
    RRP £5.99
    Subtotal:
  • Leaf Springs for 1/14 Lowboy Trailer Z-S1889 RC4WD 14th spring 79mm 1 set of 4 Leaf Springs for 1/14 Lowboy Trailer Z-S1889 RC4WD 14th spring 79mm 1 set of 4

    Leaf Springs for 1/14 Lowboy Trailer Z-S1889 RC4WD 14th spring 79mm 1 set of 4

    RC4WD

    RRP £18.49
    Additional Information - Leaf Springs for 1/14 Lowboy Trailer (4)Specifications:Super Durable Steel Leaf SpringsStiff Spring Increases Payload CapacitySimple Installation, No Modifications RequiredTotal Weight: 0.19oz / 5.5gManufactured by RC4WDShown...
    Z-S1889
    RRP £18.49
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £18.49
    Subtotal:
  • 65.3mm 2.57" Aluminum Link for Gelande 2 Z-S0817 RC4WD G2 BLACK 65.3mm 2.57" Aluminum Link for Gelande 2 Z-S0817 RC4WD G2 BLACK

    65.3mm 2.57" Aluminum Link for Gelande 2 Z-S0817 RC4WD G2 BLACK

    RC4WD

    MSRP: £7.99
    RRP £7.49
    Additional Information - 65.3mm (2.57") Aluminum Link for Gelande 2Specifications: Length: 2.57in / 65.3mmOD: 0.23in / 6mmScrew Holes: M3Each Weight: 0.1oz / 3g What's Included:1x 65.3mm (2.57") Aluminum Link for Gelande 2Optional...
    Z-S0817
    MSRP: £7.99
    RRP £7.49
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: £7.99
    RRP £7.49
    Subtotal:
  • 73mm 2.87" Aluminum Link for Gelande 2 Z-S0805 RC4WD G2 BLACK 73mm 2.87" Aluminum Link for Gelande 2 Z-S0805 RC4WD G2 BLACK

    73mm 2.87" Aluminum Link for Gelande 2 Z-S0805 RC4WD G2 BLACK

    RC4WD

    MSRP: £5.49
    RRP £3.99
    Additional Information - 73mm (2.87") Aluminum Link for Gelande 2Specifications: Length: 2.87in / 73mmDiameter: 0.23in / 6mmScrew Holes: M3Each Weight: 0.17oz / 5g What's Included:1x 73mm (2.87") Aluminum Link for...
    Z-S0805
    MSRP: £5.49
    RRP £3.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: £5.49
    RRP £3.99
    Subtotal:
  • RC4WD Spring Assortment for King Off-Road Short Course Shocks FRONT 90mm Z-S1541 RC4WD Spring Assortment for King Off-Road Short Course Shocks FRONT 90mm Z-S1541

    RC4WD Spring Assortment for King Off-Road Short Course Shocks FRONT 90mm Z-S1541

    RC4WD

    RRP £15.49
    Additional Information - RC4WD Spring Assortment for King Off-Road Short Course Shocks (Front 90mm)Optional spring rates for King short course 90mm shocks. Allow you to adjust your dampening for many applications. Specifications:Direct fit for King 90mm...
    Z-S1541
    RRP £15.49
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £15.49
    Subtotal:
  • Replacement Shock Shafts for Dual Spring Ver 2 Shocks (100mm) Z-S1114 RC4WD Replacement Shock Shafts for Dual Spring Ver 2 Shocks (100mm) Z-S1114 RC4WD

    Replacement Shock Shafts for Dual Spring Ver 2 Shocks (100mm) Z-S1114 RC4WD

    RC4WD

    RRP £11.99
    Replacement Shock Shafts for Dual Spring Ver 2 Shocks (100mm) Specifications:Shaft Total Length: Shaft OD: 0.13in / 3.5mmThread OD: M3Screw Thread Length: 0.2in / 5mmE-clip OD: 0.07in / 2mmWeight: 0.14oz / 4gWhat's Included:2x Replacement Shock Shafts...
    Z-S1114
    RRP £11.99
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £11.99
    Subtotal:
  • Replacement Shock Shafts for Dual Spring Ver 2 Shocks (110mm) Z-S1110 RC4WD Replacement Shock Shafts for Dual Spring Ver 2 Shocks (110mm) Z-S1110 RC4WD

    Replacement Shock Shafts for Dual Spring Ver 2 Shocks (110mm) Z-S1110 RC4WD

    RC4WD

    MSRP: £11.99
    RRP £9.99
    Additional Information - Replacement Shock Shafts for Dual Spring Ver 2 Shocks (110mm) Specifications:Shaft Total Length: 2.14in / 54.4mm Shaft OD: 0.13in / 3.5mmThread OD: M3Screw Thread Length: 0.2in / 5mmE-clip OD: 0.07in / 2mmWeight: 0.14oz /...
    Z-S1110
    MSRP: £11.99
    RRP £9.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: £11.99
    RRP £9.99
    Subtotal:
  • Trail Finder 2 Rear Leaf Spring Reverse Mount Z-S0415 RC4WD TF2 MWB LWB Hanger Trail Finder 2 Rear Leaf Spring Reverse Mount Z-S0415 RC4WD TF2 MWB LWB Hanger

    Trail Finder 2 Rear Leaf Spring Reverse Mount Z-S0415 RC4WD TF2 MWB LWB Hanger

    RC4WD

    MSRP: £13.49
    RRP £11.99
    Additional Information - Trail Finder 2 Rear Leaf Spring Reverse MountSpecifications:CNC MachinedBillet AluminumSmooth Black Anodized FinishLength: 0.80in / 20.35mm Width: 0.60in / 15.18mm Height: 0.27in / 6.98mm Weight: 0.21oz / 6gShown installed on...
    Z-S0415
    MSRP: £13.49
    RRP £11.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: £13.49
    RRP £11.99
    Subtotal:
  • 80mm Ultimate Scale Shocks Internal Spring Assortment Z-S1347 RC4WD length 35mm 80mm Ultimate Scale Shocks Internal Spring Assortment Z-S1347 RC4WD length 35mm

    80mm Ultimate Scale Shocks Internal Spring Assortment Z-S1347 RC4WD length 35mm

    RC4WD

    MSRP: £11.99
    RRP £10.99
    Additional Information - 80mm Ultimate Scale Shocks Internal Spring AssortmentOptional internal springs for 80mm Ultimate Scale shocks. Allow you to adjust your dampening for many applications. Specifications:Surface Treatment: BlackEnough for 4...
    Z-S1347
    MSRP: £11.99
    RRP £10.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: £11.99
    RRP £10.99
    Subtotal:
  • Yota Axle Leaf Spring Mounting Screw Kit Z-S0863 RC4WD TF2 M3 x 16mm & Locknut Yota Axle Leaf Spring Mounting Screw Kit Z-S0863 RC4WD TF2 M3 x 16mm & Locknut

    Yota Axle Leaf Spring Mounting Screw Kit Z-S0863 RC4WD TF2 M3 x 16mm & Locknut

    RC4WD

    RRP £5.99
    Additional Information - Yota Axle Leaf Spring Mounting Screw KitWhat's Included: 4x M3 x 16mm BHCS (Black)4x M3 x Locknut (Black)
    Z-S0863
    RRP £5.99
    Qty in Cart: 0
    Quantity:
    Price:
    RRP £5.99
    Subtotal:
  • Total: items /

Adding your products to cart